SUMMIT Fret Tang Cutter Style:Guiding Plate ONLY – Profiles 3-4 The 1/8" deep cross support

The 1/8" deep cross support bears the load at the nut end

TEST METHOD PARAMETERS RESULT Adhesion ASTM D3359 Cross-hatch tape 0% failure Hardness ASTM D3363 Pencil H - 2H Humidity ASTM D2247 50 hrs No effect Cold Checking NA 10 cycles from 25°C to -5°C with 8 hr

You need a high-quality screwdriver PH+1 to mount the chosen file

This straight grain Honduran Rosewood was milled up in the 1960"s

this mounting plate can hold up to a medium-sized vise

SUMMIT Fret Tang Cutter Style:Guiding Plate ONLY – Profiles 3-4 The 1/8" deep cross supportThe Summit Fret Tang Cutter is a professional tang cutter with adjustable cutting depth. Hardened jaws to HRC58 enable smooth cutting of even the hardest stainless steel frets. The Summit Fret Tang Cutter is for all fret wire including Stainless Steel. The long handle provides excellent leverage for a clean cut. Fret wire guide plate is adjustable giving 2 profile options. The depth stop is adjustable between 0 to 0. 3 inches (8. 5mm). INSTRUCTIONS ON