Pay in 4 interest-free payments of $3.30 Learn more
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
The included 5/8″ and 3/4″ miter bars and T-slot bolts enable the device to work in tandem with nearly any router table or table saw
allowing narrow cuts in thin material to be made
whilst not tainting or affecting the food in any way
Plus any other brand with a 1" x 8tpi thread
It can be retrofitted to earlier Charnwood models W619
Chestnut Products Cut’n’Polish 225ml ONEID_OVER_18 The included 5/8″ and 3/4″CutnPolish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay wet slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere. On bare wood; sand to 240 grit as normal, apply a coat of CutnPolish with the lathe
US$ 1600.00
US$ 1560.00
US$ 6405.00
US$ 11137.50
US$ 8750.00
US$ 15975.00
US$ 6510.00
US$ 6160.00
US$ 7612.50
