90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (19.0 mm OD, 88.9 mm CLR) 1-3/4" OD 2" (w) x 1" (leg)

2" (w) x 1" (leg) Channel Stock - Easyway

-History log that accumulates real life data and allows the program to increase accuracy

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

Includes: 1-1/2" Dimple Die | Requires 1-1/2" Pilot Hole

3 x OD (See Die Charts for details

90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (19.0 mm OD, 88.9 mm CLR) 1-3/4" OD 2" (w) x 1" (leg)Specs Outside Diameter of the Tubing (OD): 19. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 3 1 2" (88. 9 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Steel Backing Block Steel U Strap Resources Tube and Pipe Bending Basics What Am I Bending: