180 Degree Square Tube Die for 105 Brute Tube and Pipe Bender (18 mm OD, 114.3 mm CLR) 0.095" This die fits the Portabender

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

Three-axis twist system for angle iron "leg-in" applications

Outside Diameter of the Tubing (OD): 1-1/4" (31

or profile bending machines

Includes: 1-1/4" Dimple Die | Requires 1-1/4" Pilot Hole

180 Degree Square Tube Die for 105 Brute Tube and Pipe Bender (18 mm OD, 114.3 mm CLR) 0.095" This die fits the PortabenderSpecs Outside Diameter of the Tubing (OD): 18. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 4 1 2" (127 mm) Maximum Degree of Bend: 180, after springback Includes Steel Main Die Steel Backing Block with Anti Springback Tab Steel U Strap Resources Tube and Pipe Bending