Asahi Japanese Jibiki Marking Knife 15mm ONEID_OVER_18 6" tool rest for Record

6" tool rest for Record Power Lathe DML305 & early CL3/CL4

This Robert Sorby replacement cutter tip is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms

A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below)

Adaptor Type Insert Overall Length 32mm External Thread Size (Chuck) 1" x 8tpi External Thread Length 22mm Internal Thread Size (Lathe) 3/4" x 16tpi Internal thread Length 25mm Register 7mm Minimum Headstock Thread Length 16mm

Width - 30MM

Asahi Japanese Jibiki Marking Knife 15mm ONEID_OVER_18 6" tool rest for RecordAsahi Japanese Jibiki marking knife is of the finest quality, the laminated blade is hammer tone finished on the face and flat ground on the back side to register true against a marking gauge, the back side of the business end also has a slight hollow grind for ease of lapping the back of the blade. The cutting edge is at a very steep angle for maximum edge durability and polished to produce the legendary level of sharpness you expect from a Japanese