90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (14.0 mm OD, 88.9 mm CLR) NPS 3/8 Use a hand drill or

Use a hand drill or drill press (the only notcher with the ability to do offset notches in a drill press)

ready-to weld straight

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

1-1/2" (w) x 3/4" (leg) Channel Stock -Easyway

000 PSI hose with quick-disconnect couplings

90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (14.0 mm OD, 88.9 mm CLR) NPS 3/8 Use a hand drill orSpecs Outside Diameter of the Tubing (OD): 14. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 3 1 2" (88. 9 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Steel Backing Block Steel U Strap Resources Tube and Pipe Bending Basics What Am I Bending: