Square Tube Die for Portabender Tube and Pipe Bender (1-1/4" OD, 6" CLR) 0.134" Outside Diameter of the Tubing

Outside Diameter of the Tubing (OD): 5/8" OD (15

start up shop or a small full time fabricator

Nominal Pipe Size (Diameter Nominal): NPS 1-1/4 (DN 30)

Minimum Required Chuck-to-Table Height (for drill press use): 16" (407 mm)

13 cubic inches of oil/minute output at full pressure (vs

Square Tube Die for Portabender Tube and Pipe Bender (1-1/4" OD, 6" CLR) 0.134" Outside Diameter of the TubingSpecs Outside Diameter of the Tubing (OD): 1 1 4" (31. 8 mm) Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 6" (152. 4 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Aluminum Follow Bar Steel U Strap Resources Tube and Pipe Bending Basics What Am I