90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (16.0 mm OD, 88.9 mm CLR) 1/2" Centerline Radius: 5” (127 mm)

Centerline Radius: 5” (127 mm)

Offset Notching: None (See our Industrial Hole Saw Notcher for that capability

The simulation also forced an additional setup sheet which shows cartoon strip style transitions of the tube being bent

Outside Diameter of the Tubing (OD): 2-1/4" (57

EZ3D is also our introduction to Bend-Tech's simulation

90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (16.0 mm OD, 88.9 mm CLR) 1/2" Centerline Radius: 5” (127 mm)Specs Outside Diameter of the Tubing (OD): 16. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 3 1 2" (88. 9 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Steel Backing Block Steel U Strap Resources Tube and Pipe Bending Basics What Am I Bending: