90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (30.0 mm OD, 152.4 mm CLR) 90 Degrees Ratchet Handle Pin

Ratchet Handle Pin

Bend-Tech SM will output a DXF file to send to a CAM system for cutting or give you a 1:1 drawing on multiple sheets of paper to be used as a scaled template for fabrication

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

SE can provide a "spring back" bend angles

Maximum sized springs speed piston return and increase spring life

90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (30.0 mm OD, 152.4 mm CLR) 90 Degrees Ratchet Handle PinSpecs Outside Diameter of the Tubing (OD): 30. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 6" (152. 4 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Steel Backing Block Steel U Strap Resources Tube and Pipe Bending Basics What Am I Bending: The