Pay in 4 interest-free payments of $2.75 Learn more
Ships within 48 hours · Estimated delivery Aug 19 - Aug 24
The E103-W02DTU is a cost-effective entry-level model with a compact size
[Weight]：140g
It is critical to use a low-dropout regulator and place a 100uF low-ESR tantalum capacitor close to the VCC pin to prevent voltage dips that could trigger a chip reset or frequency drift due to the high-power load on the internal power amplifier
The built-in hardware parameters allow customizable air data rates from 2
[Interface signal]：RS485/RS422/RS232
EBYTE MA01-AXCX4020 ModBus RTU Serial IO Module RS485 Interface 4DI+2DO 8 Digital Outputs Rail Installation 8~28VDC FOTA The E103-W02DTU is a cost-effectiveThe Ebyte MA01 AXCX4020 supports the acquisition of 4 channel sensor switch input (DI), which is converted to serial port (RS485) and data is transmitted to configuration software or PLC. The serial port I O networking module (also known as "remote IO") that controls 2 relay switch outputs (DO) by issuing commands through the serial port to realize remote acquisition and control functions. [Specifications]4DI + 2DO [Interface mode]RS485 [Installation
US$ 977.50
US$ 23.00
US$ 952.50
US$ 1077.50
US$ 1077.50
US$ 125.00
US$ 110.00
US$ 50.00
US$ 115.00
