90 Degree Square Tube Die for 105 Brute Tube and Pipe Bender (19 mm OD, 114.3 mm CLR) NPS 1-1/2 Includes: 1/2" Dimple Die |

Includes: 1/2" Dimple Die | Requires 1/2" Pilot Hole

each die undergoes a thorough heat treating process to ensure optimal hardness level

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

Description

-Input the settings for the roller locations and lateral guides

90 Degree Square Tube Die for 105 Brute Tube and Pipe Bender (19 mm OD, 114.3 mm CLR) NPS 1-1/2 Includes: 1/2" Dimple Die |Specs Outside Diameter of the Tubing (OD): 19. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 4 1 2" (114. 3 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Steel Backing Block Steel U Strap Resources Tube and Pipe Bending Basics What Am I Bending: